|
|
|
|
| FREE TIP SHEET! | Product Search | | Browse | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Shipping | Support | Policies | Info | |
|
|
| Home » Brake Bleeders & Fluids » Bleeder Adapter Kits » #1112 - Tilton Adapter |
| Motive Products: #1112 - Tilton Adapter
|
|
|
|
|
|
This adapter comes with a stock Tilton Cap modified to take a hose fitting. Should be compatible with all Tilton Reservoirs with a round threaded cap. Note: these are made to order so shipping times maybe longer than our normal same day goal. Also some Tilton reservoirs require one or two wraps of teflon tape on the reservoir neck to obtain a good seal. Please see application guide to determine fitment. Note: if your Motive Products Power Bleeder does not have a set of brass fittings on the hose midway between the tank and the cap, you will also need to order p/n 0400.
|
|
|
|
|
|
|
New Page 1
|
Apex Performance LLC - Moose Creek Commercial Center - 207-B Elk Hunt Court -
Murrells Inlet, SC
29576 Toll free:
866.505.2739 - Direct: 843.299.0997
Copyright © 2001-2010 Apex Performance LLC -
All rights reserved. Email
us Return or
Exchange? Please contact us for an RMA number.
WARNING: Motorsports are dangerous. No warranty or representation is made as to
products' suitability for use or ability to protect the user from any
injury or death. The user assumes that risk. Apex Performance shall not be
liable to purchaser or to any third party for any damages arising out of
the purchase, installation or use of any item.
|
|
