Cool Shirt Cool-a-Clava

$115.00

The Cool-a-Clava is COOLSHIRT s answer to keeping a cool head under pressure

Description

It is a helmet insert that can plug into any of Cool Shirt’s current ice based and non-ice based systems to provide the best head cooling that is unrivaled by any current air or water based head cooling unit on the planet. There is no special hardware to purchase and this system is compatible with almost every helmet currently on the market.

The Cool-A-Clava is designed to provide head cooling by being inserted up into the helmet and connecting to the users existing shirt.

COOL-A-CLAVA
Instructions:
1) Insert Cool-A-Clava up into helmet. We recommend using double sided tape or Velcro to hold it in place. The Cool-A-Clava should be checked for comfort before using tape or Velcro to hold in place. 

    TIP:  **The softer, quilted side of the Cool-a-Clava can be facing outward inside the helmet so it is against your head.  Both sides of the Cool-a-Clava will cool but the softer side may be a little more comfortable.

2) Once the Cool-A-Clava is in the helmet, place helmet on head just the way you normally would. Keep the hoses coming off of the product out of the way. You want the hoses to come out at the base of the helmet in the back of the head.
3) Once in the car, route the Cool-A-Clava hoses so that they do not interfere with any other safety equipment. The hoses will be routed down to your shirt. If using only the Cool-A-Clava you can route the hoses to your hose coming off of the cooler.
4) Plug the male fitting from the product into the female fitting of the hose coming from your cooler. Plug the female fitting from the product into one of the male fittings from your shirt. Plug the other male fitting from the shirt into the other female fitting on the hose coming from your cooler.
5) Turn the cooler on. It will pump the water through both the shirt and Cool-A-Clava.

***Note: If using just the Cool-A-Clava, you will need two male ends on its hoses. These ends will plug directly into the hose coming from your cooler to provide cooling to your head.  Also note, Cool-A-Clava uses 1/4 fittings.

Additional information

Weight 1 lbs
Dimensions 10 × 8 × 6 in

Share your thoughts!

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

There are no contributions yet.

×

Login

Register


Continue as a Guest

Don't have an account? Sign Up